Overlook View Loop via Fusters

Overlook View Loop via Fusters is a 6.5-mile loop in Killington & the Coolidge Range, Vermont, climbing 773 ft to a high point of 1,762 ft. It's rated moderate, and most hikers need about 3.4 hours of moving time.

6.5 miDistance
773 ftElevation gain
1,762 ftHigh point
3.4 hEst. moving time
ModerateDifficulty

Every number on this page is computed from the trail-snapped route geometry and a real elevation profile, not estimated from a map. You can open the full route in RidgeSync to see the elevation profile against your own pace, add camps, and build it into a multi-day trip.

At 119 ft of gain per mile, this is gentler than most of Killington & the Coolidge Range, where the average is 228 ft per mile.

Open Overlook View Loop via Fusters in the planner

Load the route, see the elevation profile against your own pace, add camps and water stops, and build it into a multi-day trip. Free, no account needed to try.

Plan this route

How hard is Overlook View Loop via Fusters?

Overlook View Loop via Fusters climbs 773 ft across 6.5 miles, averaging 119 ft of gain per mile — a gentle grade. It runs as a loop, so the return leg covers new ground rather than retracing the climb.

RidgeSync estimates moving time from the trail-snapped geometry and the real elevation profile rather than a flat miles-per-hour figure, which is why the estimate below is usually slower than a generic hiking calculator on steep New England tread.

Trailhead, parking and water

The start point is a trail junction rather than a formal lot, so check parking before you commit: roadside pull-offs are frequently posted, and town roads near trailheads are often unplowed or seasonally closed.

No mapped water sources sit within 0.75 mi of this route, so carry what you need for the full distance — generally two liters for a half day, and more in summer heat.

What you'll see

The route's destination is Overlook View.

The route follows the Fusters for its main stretch.

When to go

Topping out at 1,762 ft, this one stays below the 2,500 ft mud-season line, so it dries out earlier and is a reasonable choice in late spring when the high ground is still off-limits.

Late September through mid-October is the best window here: firm trail, no bugs, and the clearest air of the year. The dependable season runs late June through mid-October. Winter turns the steeper pitches into a traction problem — microspikes are the minimum, and north-facing sections hold ice well into spring.

Regulations and Leave No Trace

Frequently asked questions

How long does Overlook View Loop via Fusters take?

Most hikers take about 3.4 hours of moving time for the full 6.5 miles, before breaks. Add an hour or more if you're stopping for lunch at the top or hiking with a group at mixed paces.

How hard is Overlook View Loop via Fusters?

It's rated moderate: 6.5 miles with 773 ft of elevation gain, or about 119 ft per mile.

How long is Overlook View Loop via Fusters?

6.5 miles as a loop.

How high is Overlook View?

The high point of this route is 1,762 ft.

Is there water on Overlook View Loop via Fusters?

No mapped water sources sit within 0.75 mi of this route, so carry everything you'll need.

When is the best time to hike Overlook View Loop via Fusters?

Late June through mid-October is the reliable window, with late September through mid-October usually the best of it. Because it stays below 2,500 ft, it opens earlier in spring than the high peaks.

Nearby hikes in Killington

More like this

Near Killington, Rutland, Woodstock

Plan the trip

Route data © OpenStreetMap contributors (ODbL). Elevation from USGS 3DEP / SRTM via AWS Terrain Tiles. Distances and elevation are computed from the route geometry, last rebuilt 2026-07-24.