Paine Mountain via Unmaintained Hiking Trail

Paine Mountain via Unmaintained Hiking Trail is a 6.6-mile out-and-back in Waterbury & the Worcester Range, Vermont, climbing 1,594 ft to a high point of 2,404 ft. It's rated hard, and most hikers need about 3.9 hours of moving time.

6.6 miRound trip
1,594 ftElevation gain
2,404 ftHigh point
3.9 hEst. moving time
HardDifficulty

Every number on this page is computed from the trail-snapped route geometry and a real elevation profile, not estimated from a map. You can open the full route in RidgeSync to see the elevation profile against your own pace, add camps, and build it into a multi-day trip.

At 242 ft of gain per mile, this is gentler than most of Waterbury & the Worcester Range, where the average is 339 ft per mile.

Open Paine Mountain via Unmaintained Hiking Trail in the planner

Load the route, see the elevation profile against your own pace, add camps and water stops, and build it into a multi-day trip. Free, no account needed to try.

Plan this route

How hard is Paine Mountain via Unmaintained Hiking Trail?

Paine Mountain via Unmaintained Hiking Trail climbs 1,594 ft across 6.6 miles, averaging 242 ft of gain per mile — a gentle grade. It's an out-and-back: 3.3 miles each way, and you get a second look at the same terrain on the descent.

RidgeSync estimates moving time from the trail-snapped geometry and the real elevation profile rather than a flat miles-per-hour figure, which is why the estimate below is usually slower than a generic hiking calculator on steep New England tread.

Trailhead, parking and water

The start point is a trail junction rather than a formal lot, so check parking before you commit: roadside pull-offs are frequently posted, and town roads near trailheads are often unplowed or seasonally closed.

No mapped water sources sit within 0.75 mi of this route, so carry what you need for the full distance — generally two liters for a half day, and more in summer heat.

What you'll see

The route tops out at Paine Mountain at 2,404 ft. Summits vary more than elevation suggests — some are open ledge with a full ridge view, others are wooded with a fire tower doing the work — so check what the top actually offers before counting on a view.

The route follows the Unmaintained Hiking Trail for its main stretch.

When to go

Topping out at 2,404 ft, this one stays below the 2,500 ft mud-season line, so it dries out earlier and is a reasonable choice in late spring when the high ground is still off-limits.

Late September through mid-October is the best window here: firm trail, no bugs, and the clearest air of the year. The dependable season runs late June through mid-October. Winter turns the steeper pitches into a traction problem — microspikes are the minimum, and north-facing sections hold ice well into spring.

Regulations and Leave No Trace

Frequently asked questions

How long does Paine Mountain via Unmaintained Hiking Trail take?

Most hikers take about 3.9 hours of moving time for the full 6.6 miles, before breaks. Add an hour or more if you're stopping for lunch at the top or hiking with a group at mixed paces.

How hard is Paine Mountain via Unmaintained Hiking Trail?

It's rated hard: 6.6 miles with 1,594 ft of elevation gain, or about 242 ft per mile.

How long is Paine Mountain via Unmaintained Hiking Trail?

6.6 miles round trip — 3.3 miles each way as an out-and-back.

How high is Paine Mountain?

The high point of this route is 2,404 ft.

Is there water on Paine Mountain via Unmaintained Hiking Trail?

No mapped water sources sit within 0.75 mi of this route, so carry everything you'll need.

When is the best time to hike Paine Mountain via Unmaintained Hiking Trail?

Late June through mid-October is the reliable window, with late September through mid-October usually the best of it. Because it stays below 2,500 ft, it opens earlier in spring than the high peaks.

Nearby hikes in Worcester Range

More like this

Near Barre, Montpelier, Warren

Plan the trip

Route data © OpenStreetMap contributors (ODbL). Elevation from USGS 3DEP / SRTM via AWS Terrain Tiles. Distances and elevation are computed from the route geometry, last rebuilt 2026-07-24.