RidgeSyncPico Peak via Sherburne Pass Trail
Pico Peak via Sherburne Pass Trail is a 5.2-mile out-and-back in Killington & the Coolidge Range, Vermont, climbing 1,695 ft to a high point of 3,860 ft. It's rated hard, and most hikers need about 3.3 hours of moving time.
Every number on this page is computed from the trail-snapped route geometry and a real elevation profile, not estimated from a map. You can open the full route in RidgeSync to see the elevation profile against your own pace, add camps, and build it into a multi-day trip.
At 326 ft of gain per mile, this is steeper than the typical hike in Killington & the Coolidge Range, which averages 228 ft per mile.
Open Pico Peak via Sherburne Pass Trail in the planner
Load the route, see the elevation profile against your own pace, add camps and water stops, and build it into a multi-day trip. Free, no account needed to try.
Plan this routeHow hard is Pico Peak via Sherburne Pass Trail?
Pico Peak via Sherburne Pass Trail climbs 1,695 ft across 5.2 miles, averaging 326 ft of gain per mile — a moderate, steady climb. It's an out-and-back: 2.6 miles each way, and you get a second look at the same terrain on the descent.
RidgeSync estimates moving time from the trail-snapped geometry and the real elevation profile rather than a flat miles-per-hour figure, which is why the estimate below is usually slower than a generic hiking calculator on steep New England tread.
Trailhead, parking and water
The start point is a trail junction rather than a formal lot, so check parking before you commit: roadside pull-offs are frequently posted, and town roads near trailheads are often unplowed or seasonally closed.
No mapped water sources sit within 0.75 mi of this route, so carry what you need for the full distance — generally two liters for a half day, and more in summer heat.
What you'll see
The route tops out at Pico Peak at 3,860 ft. Summits vary more than elevation suggests — some are open ledge with a full ridge view, others are wooded with a fire tower doing the work — so check what the top actually offers before counting on a view.
The route follows the Sherburne Pass Trail for its main stretch.
When to go
The high point sits at 3,860 ft, which puts the upper section above treeline. Stay on rock and marked tread near the summit: the arctic-alpine plants up here survive in a few acres statewide and don't recover from being walked on.
Green Mountain Club and Vermont Forests, Parks & Recreation ask hikers to stay off trails above 2,500 ft during mud season, roughly mid-April through Memorial Day. This route tops out at 3,860 ft, so it falls squarely under that request — a request rather than a closure, and widely respected. The tread is genuinely fragile when saturated, and this is the easiest way to damage a trail.
Late September through mid-October is the best window here: firm trail, no bugs, and the clearest air of the year. The dependable season runs late June through mid-October. Winter turns the steeper pitches into a traction problem — microspikes are the minimum, and north-facing sections hold ice well into spring.
Regulations and Leave No Trace
- Vermont asks hikers to stay off trails above 2,500 ft during mud season (roughly mid-April to Memorial Day) — this is a request, not a closure, and it is widely respected
- Dispersed camping on state land is generally legal below 2,500 ft, at least 200 ft from water and trails; the Green Mountain National Forest has its own rules and some areas are posted
- Campfires are prohibited at many Long Trail and Appalachian Trail sites — carry a stove and check the site before planning around a fire
- Dogs are allowed on most Vermont trails but must be under control; some summits with fragile alpine vegetation ask that dogs stay leashed
- Pack out everything, including food scraps and toilet paper — Vermont soil is thin and slow to break anything down
Frequently asked questions
How long does Pico Peak via Sherburne Pass Trail take?
Most hikers take about 3.3 hours of moving time for the full 5.2 miles, before breaks. Add an hour or more if you're stopping for lunch at the top or hiking with a group at mixed paces.
How hard is Pico Peak via Sherburne Pass Trail?
It's rated hard: 5.2 miles with 1,695 ft of elevation gain, or about 326 ft per mile.
How long is Pico Peak via Sherburne Pass Trail?
5.2 miles round trip — 2.6 miles each way as an out-and-back.
How high is Pico Peak?
The high point of this route is 3,860 ft. That puts it above the 2,500 ft line where hikers are asked to stay off trails during mud season, roughly mid-April through Memorial Day.
Is there water on Pico Peak via Sherburne Pass Trail?
No mapped water sources sit within 0.75 mi of this route, so carry everything you'll need.
When is the best time to hike Pico Peak via Sherburne Pass Trail?
Late June through mid-October is the reliable window, with late September through mid-October usually the best of it. Avoid mud season, roughly mid-April through Memorial Day, when trails above 2,500 ft are fragile.
Nearby hikes in Killington
More like this
Near Killington, Rutland, Woodstock
Plan the trip
Route data © OpenStreetMap contributors (ODbL). Elevation from USGS 3DEP / SRTM via AWS Terrain Tiles. Distances and elevation are computed from the route geometry, last rebuilt 2026-07-24.